Publicidad
Idiomas disponibles
Idiomas disponibles
Touch Panel & Remote Control Operation
BUTTON
ON: Enables control panel functions and remote
control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
POWER
TIMER button: Controls timer settings to turn off
fireplace at selected time.
Settings range from 0.5 hours to 8 hours.
TIMER
FLAME
and brighter.
NOTE: Flame effect stays on until power button
is turned off. Flame effect must be on for heater
FLAME
to turn on.
COLOR button: Makes the color flame effect
changing.
NOTE: color effect stays on until power button is
turned off. Color flame effect must be on for
COLOR
heater to turn on.
TEMPERATURE button: Turns heater on and
off.
NOTE: Press the button for 5 seconds, the
temperature setting will switch from ℃ to
℉. Same way from ℉ to ℃。
TEMP
HEATER button: Turns heater on and off.
NOTE: The heater only works when the flame
effect is on. If the flame effect is off, the heater
will not turn on.
NOTE: To prevent overheating, the heater fan
will blow cool air for 8-10 seconds before the
HEATER
heater turns on, and after the heater turns off.
BACKLight button: Changes the
back lights
NOTE: Back lights stay on until power button
is turned off.
Back
Lights
FUNCTION
button: Makes flame effect dimmer
ACTION & INDICATION
1. Press once. Indicator light turns on. Power
turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit goes
to standby. All functions turn off.
1. Press once. Indicator light turns on. Timer is
set to 0.5 hours.
2. Press again until desired setting is
reached. Indicator lights show setting.
1. Press once. Flame brightness effect gets
changing.
2. Press again. until desired setting is reached.
3. Press once. Flame color effect gets
changing.
4. Press again until desired setting is
reached.total 3 colors.
P
1. Press once: Touch panel indicator
becomes active.
2. Press again: until desired setting is '
Reached. Digital display shows setting
circles as below:
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. 750W
heater turns on and blows warm air.
2. Press again. Indicator lights up.
1500W heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air for 10 seconds to allow
heater to cool down, then turns off.
1. Press once. Flame color effect gets
colour of
changing.
2.
Press
again
reached.total 3 colors.
3. Press with third time, the backlight will be
turned off.
16
until
desired
setting
is
Publicidad
