Publicidad
STEP 4
Insert the cam pin into the bin
carriage (See Figure F).
STEP 5
Insert the cam pin lock on the
cam pin on the backside of the
bin carriage to lock the cam pin
into place (See Figure G).
STEP 6
Place the bin carriage onto
the bottom bracket and slide
the bearing bolt through the
bin carriage and top bracket's
pivot holes. Make sure that the
cam pin is sitting in the cam
guide. Loosen and reposition
the cam guide so that the cam
pin is at the end of the cam
guide's track when the cabinet
door is fully open. Open and
close the cabinet door a few
times to ensure that the door
has its full range of motion while
keeping the cam pin in the cam
guide's track (See Figure H).
INSTALLATION INSTRUCTIONS: 19L PIVOT OUT WASTE CONTAINER
FIG. F
Bin carriage
Cam pin
FIG. G
FIG. H
Top bracket
Bin carriage
Cam pin lock
Cam pin
Bin carriage
Bearing bolt
FIG. I
Note cam pin positioning
in cam guide with a fully
open door
Cam guide
3
Publicidad
