KTM 63512927144 Instrucciones De Montaje página 34

6 CHANGING THE LOCKING CYLINDER
6.1
14
Changing the locking cylinder
502244-01
502243-01
500647-01
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking lever.
–
4
Remove screw with washer
–
bp
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
Installing the locking cylinder
–
Grease and mount O-ring
Long-life grease (
–
Position and insert locking cylinder as shown.
The engaging plate
bp
Engaging plate
–
Pull up the locking lever.
–
2
Position lock handle
The lever points to the right.
–
Mount and tighten screw
Info
The hook look
cover's lock installation, see Section 7
5 2
and hook lock
into the locking cylinder.
6
.
p. 17)
bp
points downward.
engages.
on the locking cylinder as shown.
4 5
with the washer .
3
(included) is needed for the
.