Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of 6+ canopy
1. Insert large metal wire inside the front
rim of the canopy.
2. Insert small metal wire inside rear rim
of the canopy.
3. Insert ends of the small wire into
the inner mounts of handlebar, and
secure with cord loops.
4. Position the cord loops of large wire
as indicated.
5. Insert ends of the large wire into the
external mounts of the handlebar,
and secure with cord loops.
6. Affix the rear section of canopy to
the back of backrest.
Installation of 6+ seat pad and harness
1. Thread the harness shoulder straps
through one of the four pairs of slots
on the pad, according to the height
of your child.
2. Thread the harness waist straps
through the slots on the pad.
3. Thread the harness crotch strap
through the slot on the pad.
4. Affix the front loop of seat pad to the
hook under seat.
Installation of basket and carrying
strap
1. Hook carrying strap to the rings
underneath seat.
2. Secure the three straps on front
of basket by looping through slots
located on footrest.
3. On the rear rim of basket, secure the
straps by looping through the slots
located on rear legs.
Folding YOYO connect
1. Using your thumbs, simultaneously
press the two buttons to unlock the
handlebar.
2. Recline the handlebar towards
backrest.
3. Grasp the red latch under the seat,
and press the security button with
your finger.
4. While pressing on the security button,
simultaneously pull the red latch
towards you, until you hear a double
"click".
5. Completely release the red latch.
6. Hold only the shiny carrying
handlebar.
7. Lift YOYO connect from the ground.
It folds by itself.
8. If necessary, press the frame inwards
to engage the fold latch. When
folded, the YOYO connect can free
stand in upright position.
en
13
Publicidad
