Publicidad
Idiomas disponibles
Idiomas disponibles
C.
Insert the plug into a 120 volt (AC only) power outlet.
WARNING: Ensure the cord is well away from the blades.
D.
Holding the knife with one hand, press the power button positioned under the handle
to activate the motor. (See General Description) Releasing the switch will automatically
stop the motor.
WARNING: Avoid contact with moving parts. Keep hands, hair, clothing, and other
utensils away from moving blades during operation to prevent personal injury and/or
damage to the knife.
NOTE: Due to the initial heating of the materials used in the manufacturing of the product,
some light smoke/vapors may be released when used initially. This is normal.
E.
When slicing is complete, release the button and remove the polarized plug. Hold down
the blade release button, grab the blades by the safety guards for secure handling
with the cutting edge facing downward and pull the blades out of the slots.
WARNING: The blades of the electric knife are sharp! Handle with care. We recommend
using the guard sleeve provided when handling the blades.
WARNING: DO NOT fit or remove blades whilst the knife is connected to the power outlet.
DO NOT allow children to operate the appliance.
SLICING TIPS
1.
Always place food to be sliced on a wooden or plastic cutting board and not directly
on ceramic, metal, nonstick coated surfaces or countertops.
2.
Guide blades through food without forcing it through. A sawing action is not necessary.
3.
To maintain the sharpness of blades, do not cut through bones, fruit seeds, stones
or any other hard substances.
4.
For best results when carving meat and chicken allow cooked meat to sit for 10-15 minutes
before slicing, this allows the juices to set and makes carving easier and neater.
5.
If desired, string may be left around the meat whilst carving. Remove all strings
before serving.
6.
The use of a carving fork to steady the meat is recommended for straight, even slices.
CLEANING AND MAINTENANCE
WARNING: Ensure the appliance is unplugged from the electrical outlet and allow it
to completely cool down before handling or cleaning.
CLEANING
Clean appliance after each use.
1.
Ensure the unit is no longer powered by unplugging it from source.
2.
Eject the blades with the blade release button.
3.
Disassemble the blades by sliding them apart.
NOTE: Always hold blades by the shaft end, behind the safety guard, when handling
and cleaning.
WARNING: Serrated blades are very sharp. Handle with care.
5
Publicidad
