Descargar Imprimir esta página

Troubleshooting; Technical Specifications - cecotec BOLERO COOLMARKET TF 90 WHITE Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
ENGLISH
Please note
If the power cord and/or plug are damaged or dusty, electric shock and fire may occur. If there
is any malfunction, disconnect the cord and contact the Technical Support Service of Cecotec.

7. TROUBLESHOOTING

For the following minor malfunctions, please try to solve the problem yourself before
contacting Cecotec Technical Support Service.
Fault
Possible causes
The interior
The set temperature may be too low.
temperature is
too cold
The interior
The set temperature may be too
temperature is
high.
too hot
The compressor may not be running.
The freezer
The freezer is not connected to the
does not work.
mains.
The circuit breakers or fuses are
damaged.
There is no power or the fuse trips.
The freezer is not stable.
Abnormal noise
The freezer is in contact with the
wall.
The following noises are normal:
Gurgling, hissing.
These noises are caused by the circulation of coolant in the cooling system. It
has become more pronounced since the introduction of CFC-free gases. This
is not a malfunction and will not affect the performance of your freezer.
Buzzing, purring or pulsing sounds
This is the operation of the compressor motor as it pumps refrigerant around
the system.
60
Possible solutions
Increase the temperature. We
recommend position 2 for normal
use.
Decrease the temperature. We
recommend position 2 for normal
use.
Select the coldest setting, i.e.
position 4, and wait a few minutes. If
you do not hear a buzzing sound, the
compressor is not running.
Contact the official Technical Support
Service of Cecotec.
Connect the freezer to a power
supply.
Open the door and check the light
is on.
Adjust the legs.
Separate the freezer from the wall.
Low cooling
The food introduced is hot or there is
efficiency
too much food.
You open the door too often.
The door gasket has objects that do
not allow to close it completely.
The freezer receives direct sunlight
or is close to a heat source.
The freezer is not well ventilated.
The selected temperature is too high.
Undesired
There is spoiled food inside.
odours in the
The freezer is dirty.
freezer.
You introduced food with strong
smells.
Please note
If none of these situations match your problem, do not attempt to disassemble or repair the
freezer yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Please contact the place where you bought the appliance or the Cecotec
Technical Support Service. The repair must be carried out by an authorised technician and you
must use only original spare parts.

8. TECHNICAL SPECIFICATIONS

You can access the product database where the information for this model is stored by
scanning the QR code on the energy label.
Product
Reference
QR code
Voltage
Rated frequency
ENGLISH
Introduce food in the freezer when it
is at room temperature.
Check and close the door.
Remove the freezer from the heat
source.
Keep the recommended distances in
the installation section so the freezer
is well ventilated.
Adjust a suitable temperature.
Dispose of spoiled food.
Clean the freezer.
Pack food, especially if it has a strong
smell.
Bolero CoolMarket TF 90 white
02396
220-240 V
50 Hz
COOLMARKET TF 90 WHITE
61

Publicidad

loading