VALK GAIA Guia De Instalacion página 11

WARNINGS
- Carefully read the instructions and identify each part before starting the assembly. Damage or accidents caused by not
following the assembly or maintenance instructions will be out of warranty.
- Do not use the chair until all the screws are tightened.
- It is recommended to mount the chair on a soft surface to avoid damage to the upholstery.
- This chair is designed to be used by only one person at a time.
- Do not sit on the armrests.
- Avoid exposing the chair to direct sunlight or other sources of heat.
- Every 6 months check and retighten the screws if they have loosened.
- Use water and a microfiber cloth or non-abrasive sponge to clean the chair.
- This chair allows you to adjust the height of the seat and the recline of the backrest
- The height of the seat is adjusted using the black lever under the seat on the right side. The procedure for adjusting the height
of the seat is as follows:
1) Sit on the chair.
2) Pull the lever up with your right hand and hold it up.
3) The height of the seat will be lowered gently to the minimum.
4) Slightly raise the weight of the seat so that the height of the seat rises.
5) When the seat is at the desired height, release the lever and the position will be fixed.
- The recline of the backrest is adjusted by the black lever on the right side of the seat. The procedure for adjusting the backrest
recline is as follows:
1) Sit on the chair.
2) Pull the lever up with your right hand and hold it up.
3) Rest your back on the backrest and let the weight fall.
4) The position of the backrest will recline gently.
5) When the backrest is in the desired position, release the lever and the position will be fixed.
6) To return the backrest to its original position, pull the lever upwards without placing any weight on the backrest.
- Before reclining the backrest please make sure the tilt function is blocked.
- Only qualified personnel can replace or substitute the components of the height adjustment mechanism.
- The tilt function is unlocked by pulling the height adjustment lever outwards (right) and re-locked by pushing it inwards (left).
- The hardness or resistance of the tilting function is adjusted with the large black thread located under the seat, on the front of
the mechanism.
More maintenance tips and assembly video on www.valkgaming.com or on our YouTube channel!
GAIA
INSTRUCTION GUIDE
9
EN