Sauder Boulevard Cafe Serie Instrucciones De Montaje página 29

Step 24
Separate the EXTENSION SLIDES (24) from the EXTENSION RAILS (23)
å
as shown in the upper diagram below. Be prepared, the parts are greasy.
Fasten the EXTENSION RAILS (23) to the SMALL ENDS (S and V)
å
and SMALL LEFT UPRIGHT (W). Use twelve BLACK 1/2" FLAT HEAD
SCREWS (46).
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in
å
the enlarged diagram. Then, slide the inner cartridge of the EXTENSION
RAIL in to fi nd the other holes that lines up with the holes in the ENDS
and UPRIGHT. Turn a SCREW into these holes.
NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
å
24
Push the black lever down and pull the SLIDE from the RAIL.
Open end
BLACK 1/2" FLAT HEAD SCREW
(12 used in this step)
Open end
420650
W
46
www.sauder.com/service
23
V
Open end
S
Page 29