Bialetti SLW06 Instrucciones De Uso página 39

8. Problems/causes/solutions
Problem found
The appliance does not
turn on.
The bowl (2) is locked,
cannot be removed
from the motor unit.
The hopper (7)
jammed.
The motor is blocked.
Possible cause
Plug (15) not inserted.
The voltage required
for the appliance does
not correspond to the
available mains volt-
age.
Possible internal dam-
age.
The bowl was fi lled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
The hopper was fi lled
with too much food
is or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
The bowl was fi lled
with too much food
or the inserted sub-
stance is not suitable
for the features set
forth in this manual.
The safety
started owing to a
motor overheating.
39
Solution
Check proper inser-
tion of the plug or in-
sert it into a diff erent
power socket.
Check the mains volt-
age with the values
required for the appli-
ance.
Contact the Customer
service Bialetti.
Press the switch (10)
on position "REV" for
3-5 seconds twice or
three times.
Press the switch (10)
on position "REV" for
3-5 seconds twice or
three times.
Use the presser (11).
Press the switch (10)
on position "REV" for
3-5 seconds twice or
three times.
After each use, discon-
nect the plug from the
system mains outlet, empty
the hopper and the
bowl and allow the
motor to cool down
for at least 15 minutes.
EN