Phonocar 09302 Manual De Instrucciones página 21

PROGRAMMING FUNCTIONS THAT CAN BE ACTIVATED ON THE MAIN UNIT
Turn on the ignition with the alarm off and hold down the button 3
the LED on the vehicle lights up (about 7 seconds), then release.
While the LED remains on (for about 3 seconds) press button 3
confirms that the programming is on.
The LED will turn off and give five different visual indications, depending on the five functions that can be selected:
see table.
TABLE OF FUNCTIONS
LED FUNCTIONS
13. ALARM DISARMING WITH
1 flash
USER RECOGNITION
2 flashes BEEP ARMING/DISARMING
3 flashes 15. DIRECTION INDICATORS
ALARM
4 flashes 14. ANTI-HIJACK ALARM
5 flashes 16. EXTERNAL INPUT POLARITY
(default negative polarity)
(MUTE) again: a short high-pitched Beep
ACTIVATON
Press button 1 (ARMING) on the
radio remote control after the first
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 1 (ARMING) on
the radio remote control after the
second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 1 (ARMING) on the
radio remote control after the third
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
Press button 1 (ARMING) on
the radio remote control after
the fourth flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
POSITIVE POLARITY
Press button 1 (ARMING) on the
radio remote control after the fifth
flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 3 Beeps.
21
(MUTE) on the radio remote control until
DEACTIVATION
Press button 2 (DISARMING) on
the radio remote control after the
first flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
Press button 2 (DISARMING)
on the radio remote control after
the second flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
Press button 2 (DISARMING)
on the radio remote control after
the third flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
Press button 2 (DISARMING)
on the radio remote control after
the fourth flash of the LED on the
vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
NEGATIVE POLARITY
Press button 2 (DISARMING) on
the radio remote control after the
fifth flash of the LED on the vehicle.
CONFIRMATION SIGNAL:
the siren emits 1 Beep.
09302
EN