Publicidad
Idiomas disponibles
Idiomas disponibles
• Water Function: To activate/deactivate the water function, press the
water key (2). The green led 6 on will indicate that the function will be
active, but the injection pump is off. Flashing green led (6) means that
the water function is activated and the injection pump is on.
Note: When starting the fan, automatically the water function will
also be active.
• Lack of Water: The controller is equipped with a sensor for lack of
water in the tank: whenever the water level is below the minimum, the
yellow led (7) will flash indicating that the water tank must be refilled.
After filling the tank, the water function will automatically be activated.
Note: When there is a lack of water, the water function will be
automatically deactivated.
• Fan Speed: The R8 controller has 10 fan speeds that are controlled
by the (3) (Off/decrease) or 5 (On/increase) keys. Using the remote
control, the fan can be turned on with the key (12) at speed 01. If it
is turned off using the key (12), when it is turned on again using the
same key, it will start working again at the same speed it was at when
it was turned off.
• Remote Control: The remote control has all the features mentioned
above, plus the fan start/stop function key (12).
Note: If you are unable to activate the commands via the remote
control, check or change the battery (AAA model).
• Battery Indicator: The led (8) will flash if the battery voltage is below
normal.
• Bluetooth Function: To activate the bluetooth function, press and
hold the sleep key (4) for a few seconds until bt appears on the display
and the led (10) starts flashing, indicating that it is enabled for pairing
with your cell phone (other pairing instructions are described in the app
Resfri Ar). If, after starting the pairing, no device is connected, the
controller will turn off the bluetooth as a security, and it is necessary to
press the sleep key (4) again for a few seconds to reconnect any device
that had already been paired.
Note: Available for iOS and Android.
*Compatible with iOS from version 13.0 and Android 7.0.
Application available only in Portuguese (Brazil) language.
• Comfort Sleep Function: It can only be activated by the Resfri Ar
app. The Comfort Sleep function limits the fan to 7 speeds and adjusts
some more parameters of the unit control operation to generate
less noise. After 8 hours, the Comfort Sleep function is automatically
deactivated, returning to the unit control's normal operating cycle.
Application download instructions:
1 - Update your smartphone to the latest version
2 - Download the RESFRI AR app from the QR CODE
3 - You can also download the App through our website www.resfriar.com/
downloads
4 - Ready! Now with the RESFRI AR EXPERIENCE App installed on your
smartphone you can enjoy a better experience!
Download for iOS
Download for
Android
17
Publicidad
