Cleaning - Tena SmartCare Change Indicator Instrucciones De Uso

en
Change Indicator
The transmitter and sensor strip should never be cleaned
separately – only clean the Change Indicator when it is fully
assembled. Clean the Change Indicator using a cloth or a
disinfectant when required.
We recommend using:
• Pre-soaked, alcohol-based wipes without additives.
• Alcohol-based disinfection foam for the hooks on the back
side of the sensor strip.
The assembled Change Indicator can be rinsed under a tap.
Any fibres or lint attached to the hooks on the back of the
sensor strip should be removed to ensure a secure fit between
the Change Indicator and the incontinence product.
Fibres can be removed using the free end of the sensor strip.
Gateway
Clean the gateway with a dry cloth when needed.
WARNING
Clean the Change Indicator when fully assembled
to prevent water from entering the device.
Do not clean in the washing machine.
Do not submerge in water.
22

Cleaning