Descargar Imprimir esta página

Di4 Gyro Laser 2500 Manual De Instrucciones página 55

Publicidad

4˛Turn on Main Switch " I "means turn on machine " O "means turn o machine
5˛Charge
Two ways to charge the robot:
Put the robot on charge base to charge.
Use power adaptor to charge
(When charging, indicator ¦ight f¦ashes, indication ¦ight wi¦¦ turn to green co¦or once charging
comp¦eted.)
During the c¦eaning process, the host can sense that its power is insu cient and automatically
start the recharging mode to nd the charging station to recharge.
You can also command the host to start the recharging mode by the recharging button
on the remote controller, or by APP.
Charging attention:
1˛The charging station cannot be used in environments with strong ref¦ection such as direct
sunlight or nearby mirrors. If there is any object with strong re ection, please cover it 7cm from
the bottom.
2˛¦n order to ensure the norma¦ working hours of the host, p¦ease fu¦¦y charge it before use. The
charging time is about 4 hours.
3˛When charging, do not assemb¦e the water tank assemb¦y to the robot vacuum,so as to
ensure the safety of charging and prevent wet mops from damaging the oor.
4˛During charging, p¦ease don't operate other buttons except

Publicidad

loading

Este manual también es adecuado para:

Gyro laser 5000