Di4 Gyro Laser 2000 Manual De Instrucciones página 30

FIG. 5 FIG. 6 FIG. 7
On the device management page, click the button"
" (Figure 8),in the upper right corner of the device to
enter the settings page(Figure 9)..
When you see the APP enter interface Figure 5,you can start
using APP to control your ROBOT.Tap the device to enter the
main interface of APP (Figure 5), from this interface you can
choose different cleaning modes, also to check the cleaning
process/status. Tap the "more" Key(Figure 6) to enter the
multi-functional panel (Figure 7).
FIG. 8 FIG. 9
How to remove the battery
Puede hacer click en el icono "configuración
del dispositivo", como se muestra en la Figura
9, para obtener el método para conectar la
aplicación de altavoz inteligente, como Alexa,
Google home y Siri.
1. Disassemble the suction hole set or middle brush.
2. Take out two screws on the battery cover with a screw driver. 03. Take out the battery cover.
3. Take out the battery and unplug the electric wires to remove the battery.
FIG. 9