NuWave Brio 14Q Manual Del Propietário página 10

INSTRUCTIONS
• Cooking temperature can be adjusted during the 5-minute
countdown by pressing the up or down arrows. Cooking time
can be adjusted by pressing TIME and then pressing the up or
down arrows.
• If no action is taken within the 5-minute countdown the Brio
will automatically go into standby mode.
5. Place your food into the Brio and close the door. The unit will
begin cooking at the set temperature and time.
6. When the Brio is finished cooking, End will be displayed and the
unit will beep three times.
Note: Preheat can be canceled at any time by pressing ON/OFF.
When preheat is canceled, the Brio will end the preheat cycle and
automatically go into the next cooking cycle.
SEAR
Sear 1 will always be directly BEFORE regular stage cooking. Sear 2
will always be directly AFTER regular stage cooking.
SEAR 1
Default sear 1 temperature is 400°F (400F) and default sear 1 time is
5 min. (00:05).
1. Press ON/OFF. Adjust your cooking temperature and time for
regular stage cooking.
2. Press SEAR once.
• Press the up or down
arrows to adjust the
temperature for sear 1.
400°F is the maximum
searing temperature.
3. Press TIME.
• Press the up or down arrows to adjust the time for sear 1.
Time can be adjusted up to 5 min. (00:05).
4. Press START/PAUSE to begin cooking.
5. Once sear 1 is complete, the unit will beep once and
automatically go into (regular) stage cooking.
6. When the Brio is finished cooking your food, End will be
displayed and the unit will beep three times.
18 18
instructions
400F
1800
SEAR 1 2
Sear 1 2 is used to sear before and after regular stage cooking.
1. Press ON/OFF. Adjust your cooking temperature and time for
regular stage cooking.
2. Press SEAR twice. Press
START/PAUSE. The unit
will sear at 400°F for 5 min
(sear 1), go into regular stage
cooking, and then sear again
at 400°F for 5 min. (sear 2).
3. To set a different temperature and time for Sear 1 and 2, press
SEAR once and adjust Sear 1 temperature and time. Press
SEAR again. Adjust Sear 2 temperature and time.
4. Press START/PAUSE to begin cooking.
• Once the Sear 1 cycle is complete, the unit will beep once and
automatically go into regular stage cooking.
• Once the stage cooking cycle is complete, the unit will beep
once and automatically go into Sear 2 cooking.
5. When the Brio is finished cooking your food, End will be
displayed and the unit will beep three times.
Example: Sear food at 400°F for 3 min. (Sear 1), cook food at
360°F (default) for 15 min. (default), and sear again at 380°F for 5
min. (Sear 2):
Press ON/OFF. Default setting for regular cooking temperature and
time will be displayed. >> Press SEAR once. 400F (default) will
be displayed. >> Press TIME. Press up or down arrows to adjust
time to 00:03. >> Press SEAR again. Press up or down arrows to
adjust temperature to 380F. >> Press TIME. 00:05 (default) will be
displayed. >> Press START/PAUSE.
SEAR 2
Default sear 2 temperature is 400°F (400F) and default sear 2 time is
5 minutes (00:05).
1. Press ON/OFF. Adjust cooking temperature and time for regular
(stage 1) cooking.
2. Press SEAR three times.
• Sear 2 (searing)
temperature can be
adjusted by pressing the
up or down arrows. 400°F
(400F) is the maximum
searing temperature.
400F
1800
400F
1800
19 19
nuwavenow.com nuwavenow.com