Publicidad
Idiomas disponibles
Idiomas disponibles
Removing the mower blade
1.
Put the mower on its side so that the mowing
height adjusting lever comes to the upper side.
2.
To lock the blade, insert the pin into the hole on
the mower body as far as it will go.
3.
Turn the bolt counterclockwise with box wrench
17.
3
Fig.45
► 1. Mower blade 2. Pin 3. Box wrench
4.
Remove the bolt, and then mower blade.
1
2
3
Fig.46
► 1. Blade support 2. Mower blade 3. Bolt
4. Protrusion
NOTICE:
When installing the mower blade, make
sure that the protrusions on the blade support fit
in the holes in the mower blade.
Installing the mower blade
It has a top/bottom facing.
to secure the blade.
and all the fixing parts are installed correctly and
tightened securely.
2
always follow the instructions provided in this
1
manual.
NOTICE:
remove the pin from the mower body.
To install the mower blades, perform the removal proce-
dure in reverse.
4
19 ENGLISH
WARNING:
Install the mower blade carefully.
WARNING:
Tighten the bolt clockwise firmly
WARNING:
Make sure that the mower blade
WARNING:
When you replace the blades,
After installing the mower blades,
Publicidad
