Descargar Imprimir esta página

Hikmicro HEIMDAL Serie Guia De Inicio Rapido página 59

Ocultar thumbs Ver también para HEIMDAL Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
as unsorted municipal waste in the United Kingdom.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B)
standards requirements.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radioexempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled
environment.
ce matériel est conforme aux limites de dose
d'exposition aux rayonnements, CNR-102 énoncée
dans un autre environnement.
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
Use of the product must be in strict compliance with
the local electrical safety regulations.
Transportation
Keep the device in original or similar packaging
while transporting it.
Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to return
the device to the factory with the original wrapper.
Transportation without the original wrapper may
result in damage on the device and the company shall
not take any responsibilities.
Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
The input voltage for the device should meet the
Limited Power Source (5 VDC, 2 A) according to the
IEC61010-1 or IEC62368 standard. Please refer to
actual products and technical specifications for
detailed information.
The power source should meet limited power
source or PS2 requirements according to IEC 60950-1
OR ICE 62368-1 standard.
Use the power adapter provided by qualified
manufacturer. Refer to the product specification for
detailed power requirements.
Make sure the plug is properly connected to the
power socket.
DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards caused
by overload.
Battery
Improper use or replacement of the battery may
result in explosion hazard. Replace with the same or
equivalent type only. Dispose of used batteries in
conformance with the instructions provided by the
battery manufacturer.
Use the battery provided by qualified manufacturer.
Refer to the product specification for detailed battery
requirements.
Make sure the battery temperature is between 0°C
to 45°C (32°F to 113°F) when charging.
For long-term storage of the battery, make sure it is
fully charged every half year to ensure the battery
quality. Otherwise, damage may occur.
The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
Batteries of improper size cannot be installed, and
may cause abnormal shutdown.
The battery cannot be charged with external power
source directly.
Confirm there is no flammable material within 2 m
of the charger during charging.
DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
DO NOT place the battery in the reach of children.
DO NOT swallow the battery to avoid chemical
burns.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service center. We
shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
device may be impaired.
Clean the lens with soft and dry cloth or wiping
paper to avoid scratching it.
It is recommended to reboot the device every 2
hours when using it to ensure the device performance.
Using Environment
Make sure the running environment meets the
requirement of the device. The operating temperature
shall be -20 °C to 50 °C (-4 °F to 122 °F), and the
operating humidity shall be 95% or less, no
condensing.
Place the device in a dry and well-ventilated
environment.
DO NOT expose the device to high electromagnetic
radiation or dusty environments.
DO NOT aim the lens at the sun or any other bright
light.
When any laser equipment is in use, make sure that
the device lens is not exposed to the laser beam, or it
may burn out.
Avoid equipment installation on vibratory surface or
places subject to shock (neglect may cause equipment
damage).
This device can only be safely used in the region
below 2000 meters above the sea level.
Emergency
If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
57

Publicidad

loading