17. Pipe angle
18. Clamp
19. Flexible hose
20. Control pipe
21. Cable clamp
22. Intermediate pipe
23. Blower nozzle
24. Pipe knob
25. Metal pipe
26. Operator's manual
27. Combination wrench
28. Idle speed screw
Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not used
carefully and correctly. To prevent injury
to the operator or bystanders, read
and obey all safety instructions in the
operator's manual.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection. If the
environment contains dust, use a
breathing mask.
Use approved protective gloves.
Mixture of gasoline and two-stroke oil.
Air purge bulb.
Keep all parts of your body away from hot
surfaces.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
1913 - 001 - 16.08.2022
Choke, open position.
Choke, close position.
yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Manufacturer
Husqvarna AB
SE-561 82, Huskvarna, Sweden
Safety
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
Look out for thrown objects.
Thrown objects can cause seri-
ous injury. Use personal protec-
tive equipment.
Keep a safety distance at a min-
imum of 15 m to persons or ani-
mals.
The rating plate or the laser
printing shows the serial num-
ber. yyyy is the production year
and ww is the production week.
Used if there is a risk of
3