Publicidad
Idiomas disponibles
Idiomas disponibles
Set time & temperature for each day
Long-press PRG and the display will
change to enable input of the time and
temperature of the 4 periods for each day
of the week, starting with the first period
on day 1.
The Time will flash at the top left of the
display.
Use + or – buttons to change the time. Press PRG to advance to the temperature
setting which will then flash.
Use + or – buttons to change the temperature.
Press PRG to advance to the next period.
Repeat the above steps to complete the 4 periods for each day. For 7 days of the
week this means a total of 28 programming steps.
After the final programming entry, the next click of PRG will return the unit to normal
operation.
Holiday Mode
Holiday (Away) mode allows you to set a
cooler fallback temperature to maintain
in the house to save energy but avoid
frozen water pipes. The mode has a
countdown timer in which you can set up
to 99 days away, ensuring your normal
heating settings resume ahead of your
return, allowing you to come back to a
warm property.
To set the countdown timer, long press on the Holiday (Palm Tree) button on the key
pad. The "HOL" Mode is displayed and the days display will begin to flash.
Adjust the number of days you are away using + and – keys.
Press the Holiday button again to set the temperature to be maintained while you
are away.
Alter the temperature using the + and – keys.
T-MT Mains powered
wifi thermostat
Publicidad
