Getting Started
Before first use
This product has been packaged to protect it against transportation damage. Unpack the appliance
and keep the original packaging carton and materials in a safe place. It will help prevent any damage
if the product needs to be transported in the future, and you can use it to store the appliance when
it is not in use. In the event that the carton is to be disposed of, please recycle all packaging materials
where possible.
Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging
materials are out of their reach and disposed of safely.
Inspect all parts of the appliance for visual damage.
Unwind the power cord to its full length and inspect the cord and plug for damage.
Do not use the appliance if the appliance or its cord have been damaged or are not working properly.
In case of damage, contact our after-sales support center for advice on examination, repair or return
of the damaged product.
Make sure you have read and understood all instructions and warnings in this manual. Refer to the
Product Overview, opposite, to familiarize yourself with the product and the operation buttons, pay
particular attention to the safety instructions on the previous pages.
Remove any adhesive labels and wipe the outside of the toaster with a damp cloth. Make sure no
packaging material is remaining is in the toasting slot and no loose objects have fallen into the
toaster.
Place the toaster on an even and heat-resistant surface. Do not place the toaster where heat,
moisture or high humidity are generated, or near combustible materials.
Plug the toaster into an appropriate power point and switch on the outlet. The power socket must be
readily accessible so that in an emergency it can be easily switched off and the toaster unplugged.
Set the browning control to level 4, push down the toasting lever and let your toaster heat up without
any bread.
NOTE: Due to remnants from the manufacturing process burning off, you may notice a slight
burning smell or smoke when first using the toaster. This is no cause for concern. Ensure good
ventilation and let the toaster complete a few toasting cycles until no more odor or smoke is present.
After a short cooling down period, your toaster is now ready for use. The usage instructions start on
the following page. All parts referred to in the instructions are listed on above page.
-36-