Publicidad
Idiomas disponibles
Idiomas disponibles
Recommended Track Cleaning Procedure
•
Auto Cleaning Mode
to engage Cleaning Mode (LED Turns purple)-insert cleaning
card into feed hopper. Cleaning card automatically scrubs the
track. LED color returns to its prior state after cleaning
process is complete, then scanner is ready to process.
Manual Cleaning: Open all of the scanner covers
8227 6462-000 August 2022
8227 5691-001 November 2016
8227 5691-000 August 2016
8227 5691-001 November 2016
8227 5691-000 August 2016
SmartSource Micro/Micro Expert Elite W/ Inkjet – Setup and Operation
:
Tap the power button down 3 times
Check the paper path and remove
all bits of paper, paper dust, paper
clips, and staples from the track
Use a Micro-duster (Digital
Check Store # 757211995 ) to
blow air along the track to clean
the paper path & sensor shown
by arrows (both sides of track)
Image Camera Cleaning Procedure
• Clean front and rear camera glass and track walls, as required
• Use Digital Check cleaning pad # 751804907
Rear
Camera
Glass
Front
Camera
Glass
4 of 4
Publicidad
