Lcd Display - ITEHIL IT500 Manual De Usuario

US

LCD Display

a. Remaining Charge、Discharge Time
-This number indicates the remaining charge / discharge time (mins).
b. Battery Level Indicator
-Shows the remaining power. The icon blinks while charging.
When warn of low battery. Please charge immediately.
c. Battery Level Percentage
-Shows the remaining power (%). When warn of low battery.
Please charge immediately.
d. Temperature Indicator
shows current operating temperature
-green is normal
yellow is higher temperature
red is highest temperature abnormal
When the temperature is too high,Please cool down the product before use.
e. Current Output
-Shows the current output power in watts
f. Current Input
-Shows the current input power in watts
g. Port Usage Indicators
AC Indicator
USB-A Indicator
USB-C Indicator
USB-A Indicator
Fan Indicator
How to use IT500
1
2
3
Ambient Light
The AC indicator icon will appear when the AC power button is turned on.
The USB-A indicator icon will appear when the USB-A power button is turned on.
The USB-C indicator icon will appear when the DC is enabled and typy-C port is connected.
The USB-A indicator icon will appear when the USB-A power button is turned on.
Step1: Turn on power
Step 2: Turn on the AC / DC indicator
Step 3: Connect to the relative output port,enjoy your power life.
the IT500 will trigger the overload protection and shut down the power output.
Short press the light switch once for the lighting mode,provide a wide range of lighting effect.Press the light switch
twice to provide far range of illumination.Press the light switch three times to turn the lamp to flashing mode,
used for an emergency help.Press the light switch to turn it off.
Do not block the air outlet during use to avoid damage to the product
b
c
Shows the fan is in on.
When the total output power more than 500W，
Do not bring this product on flights
a
f
g
Travel Notice
d
e