Oled Screen; I-Press App; Error Code - Greenlee GATOR EK1550FLX Operación Manual

OLED Screen

The OLED screen displays information about the tool and is used to set up operating profiles and display error codes
in the event of abnormal operation (See Troubleshooting). Turn on the screen by inserting the battery and pressing
the trigger.
Cycle through the various displays using the left and right buttons on either side of the screen.
Display OLED Screen

ERROR CODE:

Error Screen
****
P
Battery &
Pressure
^
P
Tool Software
FW:
Information
123456AB001
CURRENT USER : 1
Profile Mode
SINGLE CLICK
Select
MRS+
#ODS #DAYS
Service
Information
TOTAL:
Tool Operation t=
Q=
Information
n=

i-Press App

This tool has wireless capability that allows it to communicate with the Greenlee
i-press app on your smart device.
1. Install the "i-press Klauke Software Solutions" from the Apple App Store™ or
Google Play™. Open the app on your smart device and select the "Greenlee"
option.
2. Switch on the wireless function on your smart device and activate the tool to
establish a connection.
The app will allow you to create projects, personalize your tool, display tool pressure readings, battery charge, the
last service date, and more. Instructions how to use the app are shown in the i-press app itself; alternately, request a
brochure (G-1024 10/22) from any Greenlee distributor.
i—Press is a registered trademark of Gustav Klauke GmbH
App Store is a registered trademark of Apple Inc.
Google Play is a registered trademark of GOOGLE INC.
52080019 REV 05
Error code numbers (See Troubleshooting)
Wireless status, battery charge, current pressure, and max pressure.
XXX PSI
Press and hold both buttons to change units, select with right button, and confirm by
XXX PSI
jogging the tool.
INFO
2.0
Firmware version, serial number
User 1: Single Trigger Pull Operation
User 2: Double Trigger Pull Operation.
To Change Mode:
1. Press and hold both buttons to change user.
2. Press trigger to lock in mode.
Cycles and days until next service.
Since Date of Manufacture;
1.35 h t=Elapsed Operating Hours
8.87 Ah
q= Ah Used
1560
n= # of Crimping Cycles
15 Ton Battery-Powered Crimping Tool
Information Shown
Press trigger twice within 0.5 sec. to operate
© 2022 Greenlee Tools, Inc.
9