Operation; Positioning The Appliance; Filling The Water Tank - Qilive Q.5815 Manual De Instrucciones

5. OPERATION

The steam station can be used for dry ironing and steam ironing. For optimal steam
flow, we recommend using a padded ironing board with a mesh top or vent holes to
allow steam to pass through the fabrics and prevent moisture from building up.
The heating-up indicator light (1) illuminates when the iron is heating up to the set
temperature, and goes off when the iron is ready to use.

5.1. POSITIONING THE APPLIANCE

1. Place the steam station base (5) on a stable, level and firm surface.
2. Remove the steam supply hose (12) from the storage compartment (6). Unwind
the steam supply hose and the power cord completely (13).
3. Make sure that the iron is placed correctly on the thermal insulated platform (11)
(see Fig.1).
4. Fill the water tank if you wish to steam iron (→ FILLING THE WATER TANK).

5.2. FILLING THE WATER TANK

The appliance has been designed to be used with tap water. If you live in an area with
hard water, we recommend using distilled water available from stores, or a mixture of
50% tap water and 50% distilled water to reduce mineral build-up in your appliance.
1. Before filling the water tank, make sure that the appliance is unplugged from the
wall socket.
2. Hold the handle (7) underneath the water tank (4) and pull it straight out to remove
the water tank from the steam station base (5) (Fig. 2).
3. Fill the water tank with tap water through the filling opening (3). Do not exceed the
"MAX" (1.2 L) level mark.
4. Insert the water tank back into the steam station base.
Fig.1
Fig.2
7
EN