Getting started
Loading batteries
En
Use one CR-V3 lithium battery pack, or two AA (R6) NiMH batteries or
alkaline batteries.
1
2
3
4
Get user manuals:
See SafeManuals.com
Important
• CR-V3 lithium battery packs cannot be recharged.
• Do not peel the label on a CR-V3 lithium battery pack.
• Manganese (zinc-carbon) batteries cannot be used.
Make sure that:
• The lens barrier is closed.
• The monitor is off.
• The lamps on the right of the viewfinder are off.
Slide the battery compartment cover in
a
the direction of
(the direction
indicated by the
and lift it up in the direction of
Insert batteries in the direction shown in the illustration.
When using AA (R6) batteries
When using AA (R6 batteries),
also refer to the mark on the
bottom of the camera that
shows the correct way to insert
batteries.
Close the battery compartment cover so
that it pushes batteries down inside.
While pressing the
cover in the direction of
• If you have difficulty closing the battery
compartment cover, do not force it. With the
battery compartment cover in place, press down
mark firmly and push in direction c.
firmly the
10
mark on the cover),
b
.
When using a CR-V3 lithium battery pack
mark, slide the
c
.
a
b
c