GYS POWER PACK 1300 Manual De Instrucciones página 14

Operating manual
USING THE LAMP
The POWER PACK LED has 5 lighting modes: low-medium-strong intensity - strobe - SOS.
Press the button of the lamp. It lights up in low intensity. Press again to switch to the next mode.
The 6th press turns off the lamp.
TROUBLESHOOTING
Analysis
The product is not charging.
The charging indicator light has
gone out.
The outputs do not work.
The output has turned off while in
use.
GUARANTEE
The warranty covers all defects or manufacturing faults for one year starting from the date of purchase (parts and
labour).
The warranty does not cover:
• Any other damage caused by transport.
• The general wear and tear of parts (i.e. cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environmental faults (i.e. pollution, rust and dust).
In the event of a breakdown, please return the appliance to your distributor, along with:
- a dated proof of purchase (receipt or invoice etc.).
- a note explaining the breakdown.
14
Translation of the original
instructions
Cause
The charger is not properly connected to the
POWER PACK.
The connection is good but the charging
indicator light still remains switched off.
The indicator light is on but the unit is still not
charging.
The charging indicator is not properly
connected to the POWER PACK.
The output block is not turned on.
The POWER PACK is at limited capacity.
The charging or operating power of the veh-
cile is greater than that of the POWER PACK.
The charging or operating power of the veh-
cile is greater than that of the POWER PACK.
The vehicle does not have enough charging
power. The POWER PACK has not
detected it. It will turn off automatically.
POWER PACK 1300 / 1500
Solutions
Check the charger's connection.
The charger is defective, contact the
After-Sales Service.
The device is damaged.
Check the POWER PACK's connection to
the vehicle.
Turn on the output block (buttons 3, 9 or
10).
Charge the POWER PACK.
The vehicle requires a more powerful
power source.
The vehicle requires a more powerful
power source.
Turn the POWER PACK back on.