Display Settings; Timer Setting - Engel RT5130T2 Manual De Usuario

SYSTEM SETUP
TV System
Video Resolution: There are many options in this menu. If you are using HDMI
output connection, the default is 1080i_ 25. If you are using SCART output con-
nection, the default value is 576i.
Aspect Mode: Available options: Auto, 4:3PS, 4:3LB or 16:9. The default value is
Auto.
Digital Audio Output: Available options: BS Out or LPCM Out. The default value
is LPCM Out.

Display settings:

Brightness (default value is 50), Contrast (default value is 50), Saturation (default
value is 50), Hue (default value is 50) and Sharpness (default value is 5).
Local time setting
Region: Select your country.
GMT Usage: Set to "By Region" if you want to use GMT and set the time automati-
cally.Set to "User Define if you want to set the time zone manually, or set to "Off",
if you want to set the date and time manually. The default value is "By Region".
GMT Offset: Set the time zone (only if "GMT Usage" is set to "User Define").
Date: Set the date (only if "GMT Usage" is set to "Off").
Time: Set the time (only if "GMT Usage is set to "Off").
Timer Setting
Timer Mode: Set the time interval: Once, Daily or Off.
Timer Service: When is set to PVR, the receiver will switch to the preset channel,
at preset date and time, and start recording the program. When is set to Channel,
the receiver will switch to the preset channel at preset date and time.
Wake up channel: Set the channel.
Wake up date: Set the date.
On Time: Set the start time.
Duration: Set the duration of displaying or recording a channel.
Note: It is also possible to set the Timer from EPG menu (see EPG section).
44