Operation - Dometic Day/Night Controller Instrucciones De Montaje Y De Uso

Operation

Command
UP
MY
DOWN
5.4 Adding and deleting transmitters
Up to 36 transmitters from the Somfy Telis range can be connected to the con-
troller using the program button (fig. 1 5).
5.4.1 Adding transmitters
1. Press and hold the program button (fig. 1 5) for 2 seconds until the
receiver LED lights up briefly.
2. Within 2 minutes press the Prog button on the back of the transmitter.
✔ The receiver LED (fig. 1 4) flashes 7 times to confirm that the transmitter has
been added.
Repeat this process for further transmitters.
5.4.2 Deleting transmitters
1. Press and hold the program button (fig. 1 5) for 2 seconds until the
receiver LED (fig. 1 4) lights up briefly.
2. Within 2 minutes press the Prog button on the back of the transmitter.
✔ The receiver LED (fig. 1 4) flashes 7 times to confirm that the transmitter has
been deleted.
Repeat this process for further transmitters.
➤ To delete all transmitters on the system, press and hold the program button
(fig. 1 5) for approx. 7 seconds.
✔ After 2 seconds the receiver LED (fig. 1 4) lights up continuously.
✔ The receiver LED (fig. 1 4) flashes 1 time to confirm that all transmitters have
been deleted.
6 Operation
➤ Press the UP button to move both blinds to the up position.
8
DIP 8
OFF
DNC mode (for window blinds)
Motor 1 Motor 2
UP UP
DOWN UP
DOWN DOWN
Day/Night controller
ON
RFB mode (for roof blinds)
Motor 1 Motor 2
UP DOWN
DOWN DOWN
UP UP
EN