Cleaning The Filter; Replacing Light Bulb - Uline TORNADO H-10166 Manual De Instrucciones

CLEANING THE FILTER

The post-motor HEPA filter is located in the base of
the vacuum.
NOTE: Filter should be checked often and
cleaned when it becomes dirty.
1. Remove screw on filter
cover with a Phillips
head screwdriver. Lift
off filter cover.
(See Figure 20)
2. Remove post-motor
HEPA filter. Blow out filter
with air and reinstall.
3. Replace filter cover.
Secure with previously
removed screw.
PAGE 7 OF 24
MAINTENANCE CONTINUED
Figure 20

REPLACING LIGHT BULB

1. Unplug the vacuum.
2. Insert a flathead screwdriver into slot and remove
light lens. (See Figure 21)
Figure 21
3. Grasp bulb and pull out. Discard old bulb and
replace with new one. (See Figure 22)
Figure 22
4. Replace light lens.
1022 IH-10166