PLAYKIN QUAD Manual Del Usuario página 36

MOUNTING THE DRIVE WHEEL
1
4
1. Slide the gearbox onto the rear axle on the right side of the vehicle and engage.
2. Plug the gearbox connector into the motor connector.
3. Connect the red positive terminal to the battery.
4. Slide washer onto drive wheel axle
5. Place the drive wheel on the axle
6. Insert the washer and tighten the lock nut clockwise.
MOUNTING THE REAR WHEEL
1. Slide the washer onto the rear wheel axle on the left side of the vehicle.
2. Place the rear wheel on the left axle.
3. Insert the washer and tighten the lock nut clockwise.
2
5
3
36
3
6