Handlebar Assembly - PLAYKIN QUAD Manual Del Usuario

ASSEMBLY OF THE FRONT WHEELS
1. Slide the washer onto the front wheel axle,
2. Place the front wheel on the front axle.
2
3. Insert the washer and tighten the lock nut clockwise.
4. Do the same procedure for the other side of the shaft.

HANDLEBAR ASSEMBLY

1
4
1. Connect the steering rod to the handlebars, positioning the curve of the rod in the opposite
direction to the handlebars.
2. Secure the handlebars and the steering rod with the screw.
3. Insert the handlebars and the steering rod into the corresponding hole in the vehicle.
4. Turn vehicle body upside down. Snap the steering rod into the steering hole and secure with
the nut.
3
2
4
37
3
EN