Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions:
• The central unit must be installed horizontally and with
the Shadow-Tracker logo on the top for optimum GPS
reception. Metal parts can affect signal reception, both
GPS and GSM.
Cables alimentación
• The ACC (orange) wire connects to the positive ignition
of the vehicle. It is important to connect it to detect the
on and off of the vehicle. If you do not connect, we would
not notify you when the vehicle is powered on, and will
not keep track of travel for that device.
• The power supply may vary from 9 to 36 V. Use the ori-
ginal power cord. During installation, the negative cable
must be grounded, do not connect other cables at the
same time.
• The yellow wire is connected to the ignition module via a
relay (86). Allowing or blocking, the ignition of the vehicle.
It is recommended to always install a hidden switch that
allows the activation of ignition in case of loss of mobile,
coverage, etc.
Extensión interface
• The violet cable is connected directly to the battery positi-
ve. To indicate the state of charge of the battery.
• In the connection of the vehicle alarm with the locator, the
incoming signal is always 12V +.
• When we send the ignition of the horn / flashers from the
mobile device, it will emit 5 flashes.
19
Publicidad
