Publicidad
Idiomas disponibles
Idiomas disponibles
Principal functions:
Location of the vehicle by GPS:
The device will show the last stored position on the server.
Sending the position every 10s or 300m in normal operating
mode. Show us if the vehicle is on, off, stopped, moving, etc.
Travel Reports:
We can access data of distance, speed, average speed,
start point, end, hour, duration, etc. of the last trips. For this
it is essential to make a good installation, connecting the
corresponding cable (orange) to a positive start of the vehicle.
Alarms
• Power cut:
If a power outage occurs, an alert is logged on the server.
• Low battery:
When the battery is low it is registered on the server.
• Exit or entry of Geofence marked:
Through the web we can draw different geofence on the map.
Notifying when entering or leaving that marked area.
• Maximum speed exceeded:
We can establish a maximum speed, if the vehicle surpasses it
is registered.
• Vibration alarm:
If the vehicle vibrates for a while and the ignition is off for at
least 3 minutes, the vibration alert is activated.
22
Publicidad
