Optional Accessories; Disconnecting The Battery - Jensen VM9021TS Manual De Instrucciones

WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING! Do not change the fuse on the power wire
without professional guidance. Using an improper fuse
may cause damage to the unit and result in a fire.
WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.

Optional Accessories

3
iAUX READY (Sold Separately)
• Can connect to any portable media device or multimedia
device using a standard 3.5mm plug
• Converts 3.5mm auxiliary input to RCA stereo outputs
for easy connection to the radio's AUX inputs

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.
NOTE: If the VM9021TS is to be installed in a vehicle
equipped with an on-board drive or navigation computer,
DO NOT disconnect the battery cable. If the cable is
disconnected, the computer memory may be lost. Under
these conditions, use extra caution during installation to
avoid causing a short circuit.
2
VM9021TS