Publicidad
Step 9
Fasten two METAL L-BRACKETS (4) to the ENDS (B and C). Use
å
four BLACK 5/8" FLAT HEAD SCREWS (10).
Fasten the METAL L-BRACKETS (4) to the top of the base unit.
å
With fi rm pressure, use two BLACK 1" FLAT HEAD SCREWS (9)
through the METAL L-BRACKETS and into the base unit.
NOTE: There are no pre-drilled holes in the top of the base unit.
å
Extra pressure is needed for the SCREWS (9).
C
Page 12
4
B
4
www.sauder.com
If you're doing this to
help a friend, don't
leave without a bite.
BLACK 5/8" FLAT HEAD SCREW
(4 used for the BOTTOM BRACE)
9
BLACK 1" FLAT HEAD SCREW
(2 used for the BASE UNIT)
10
423532
Publicidad
