DESCRIPTION OF FUNCTIONS
FRONT PANEL
1. OPEN/CLOSE
Press to eject the disc.
Note:
Disc can't be ejected unless the stop or pause button
has been pushed first.
2. TIME
- CD Mode: Press this button to switch Single Elapsed
Time, Single Remain Time and Total Remain Time.
- MP3 Mode: Press this button to switch Single Elapsed
Time and Single Remain TIME.
When pressing this button to switch, the Time Bar is also
changing on Display.
3. CONT./SGL
Press this button to switch: Continue Mode / Single AUTO
CUE Mode.
- Continue Mode: Playing from the first track to the last
track and then going on from to the first track continually.
When pressing the "
", it pauses and stops at the Main
Cue of the next track.
- Single Auto Cue Mode: When going on to the next track
or skipping "
" to the next track, it pauses and stops at the
Main Cue.
4. TITLE
Press this button to show FILE, TITLE, ALBUM and
ARTIST. It only supports MP3 format.
5. PROG
Start PROG-Edit:
When pausing under Normal Mode, press this button to
execute program edit. Select the track by pressing
SKIP(CD/MP3) or FOLDER/TRACK (only MP3) and then
press the PROG to set the memory. The display MM:SS:FF
shows [P01] -> [P02] means it's waiting for memorizing the
next track. Then press "
/
" to select and set a memory
again.
Play PROG:
When complete, press PLAY/PAUSE button starting to
play your edit. Once pressing the PAUSE button, it can be
added the program continually.
Exit PROG Play/Edit:
In mode Pause, pressing PROG button for two seconds can
return to the normal mode. Once returning to the normal
mode, the memories will be wiped out.
6. FOLDER
Press this button to switch between MP3 Folder and MP3
File.
- When under MP3 File mode, Total-Track shows the total
MP3 files in the folder.
- When under MP3 Folder mode, Total-Track shows the
total folders in this CD.
7. HOT-CUE
This unit will allow you to play from 3 cue points instantly.
A. Set CUE memory: Press the MEMO button first, and
then press the CUE button to complete the CUE setting,
then the CUE button will light on.
B. Play" CUE" memory: Pressing specific CUE button to
perform this function.
8. LOOP
1. Press IN to memorize a start point and press OUT to
memorize an end point. Then the Loop is keep playing.
2. Press OUT again to edit the Loop playback.
3. Press the RELOOP can exit or call to the Loop playback.
4. The loop function will be limited at the same track. It
can't set the IN at track 1 and cross to set the OUT at track 2.
9. RELAY
Press the "RELAY" button to activate. When one unit is in
play mode, and the other unit is in "pause" mode; pause the
playing unit, the other unit will automatically start to play
(the button PLAY/PAUSE button will blink).
10. FOLDER/TRACK "
/ "
1. Press "
/
" to select tracks and folders. Keep pressing
it and use Jog Wheel to do tracks fast search.
2. When on loop edit, pressing "
double and pressing "
" to trim the loop to half.
11. DISPLAY
When performing specific function, it will show on Display.
12. CUE
When under PAUSE mode, pressing the CUE button to set
the cue point; when under PLAY mode, press this button to
pause the music at the memorized point.
13. PLAY/PAUSE
To Press this button can play the music and to press again
can make the music pause.
14. PITCH ON/OFF
To push this button first so that the pitch can be adjusted.
15. PITCH RANGE
To switch the pitch range, 8% and 16 % and 100% in case
we play a CDDA.
16. MT (MASTER TEMPO)
When this function is on, the key of the song is locked even
though the Pitch Fader is adjusted.
17. TAP
Pressing this button with the beat can count the BPM of the
music.
18. PITCH BEND
+
Press
to rise up the speed and Press
speed.
19. SOUND EFFECT
These buttons will perform Flanger, Filter, Echo, Reverse
effects.
+ info pag. 5
20. PITCH CONTROLSLIDER
To match the beat of the other music piece you should
adjust the Pitch Control to change the speed.
21. SCRATCH
Activate the scratch effect with this button and then
perform the scratch effect by Jog Wheel.
22. SEARCH
Press this button first and use Jog Wheel to perform
searching forward or backward.
23/3. REMOTE CONTROL
Select Lock, Tack and Cue/Play by using this switch.
LOCK:
When the fader is advanced, a switch starting the replay will
be closed in the mixer.
When the fader is closed, the switch will open and set the
CD/MP3 player to pause.
TACT:
" to trim the loop to
When the fader is advanced, the replay will start.
When the fader is closed, the CD/MP3 is set to pause.
CUE/PLAY:
When the mixer fader is advanced, the replay will be started
by a short control pulse of the mixer. When the fader is
closed, the unit is set to pause again by another control
pulse.
+ info pag. 5
24. JOG WHEEL
Use the wheel to adjust the speed to get an even close
BPM with another track. It also can trim the loop long
or short.
SLEEP:
Leave the unit unused for 20 minutes; the machine will
shut off automatically.
─
to Slow down the
3