Descargar Imprimir esta página

Reboots ONE PRO Manual De Instrucciones página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

STEP 4: STOPPING AND DISASSEMBLY
After the set time has elapsed or after pressing the off switch, remove the multi-plug from the device. If you don't feel well
during the message, you can switch the system off at any time.
Once turned off, you can open the cuffs. To quickly deflate the air chambers after use, press on the air chambers with both
hands.
The gray tube cuff connectors can be left permanently connected.
For storage, place the cuffs (incl. tubes) on top of each other. Then roll them loosely together.
The cuffs can be cleaned using a damp cloth and mild detergent. Allow the cuffs to dry thoroughly.
TROUBLESHOOTING
AIR IS ESCAPING (AUDIBLY)
1.
Check the tubes and connectors for damage or kinks that could cause air to be trapped.
2.
Make sure the multi-plug is seated correctly in the control unit.
18

Publicidad

loading

Productos relacionados para Reboots ONE PRO