Reboots ONE PRO Manual De Instrucciones página 19

TROUBLESHOOTING
THE DEVICE DOES NOT TURN ON
1. Make sure the power supply is seated correctly in the unit and plugged into an outlet.
2. If the device still won't turn on, remove the power supply from the device. Turn the device over and remove the fuse
holder labeled "FUSE" on the bottom of the device using a screwdriver. Check whether the fuse
3. If the fuse is intact, screw it fully back into the device and contact our customer service team. If the fuse is damaged,
replace it with a commercially available thin wire fuse (slow blow (TR); 3.15A; 5x20mm).
THE CUFFS INFLATE IN THE WRONG ORDER
1. Make sure the multi-plug is inserted in the control unit using the correct orientation. The multi-plug is seated correctly
if the small fittings of the multi-plug are in the openings found above the air outlets.
THE CONTROL UNIT IS UNUSUALLY LOUD
1. Unusually loud means that you're unable to carry on a conversation or relax during use or that the device's volume level
exceeds 75dB.
2. This can also happen if the security screw included during transportation has not been removed. We normally remove
the transportation security screw prior to delivery, however if your device still has one you can easily remove it yourself.
3. To do this, open the cover on the bottom then remove and dispose of the transportation screw.
inside is intact.
19