Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
HOW TO CLEAN
Because large volumes of air pass through your Vornado Air Purifier
each day, it will need regular cleaning.
1. Unplug the unit before cleaning.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
2. Wipe down with a soft, damp cloth. (Figure 1)
3. Dust or vacuum the interior and along the sides. It is recommended
to clean the interior when the Filters are changed. (Figure 2)
Fig. 1
Fig. 2
Other Maintenance
The motor is permanently lubricated so it needs no service. No other
serviceable parts, other than Filters, are contained within the unit.
16 English
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE AND SOLUTION
Unit fails to power on.
Unit is not plugged in. Plug power cord into electrical outlet.
Front Panel may not be properly installed. Remove and reinstall the Front Panel to assure proper
placement. Refer to FILTER REPLACEMENT.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker /
ground fault interrupter, or replace fuse. For assistance, contact a licensed electrician.
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Airflow is weak or slow.
Unit set to a low speed setting. Adjust to a higher speed setting.
Debris build-up on filter. Check and replace Filters.
Airflow is blocked. Remove obstruction.
English 17
Publicidad
Solución de problemas
