Publicidad
Idiomas disponibles
Idiomas disponibles
TO AVOID PERSONAL INJURY AND PROPERTY
DAMAGE FROM, BUT NOT LIMITED TO, THE RISK
OF ELECTRIC SHOCK OR FIRE:
1.
DO NOT disassemble and reassemble the charger, or it may cause
short-circuit.
2.
DO NOT charge batteries whose cover are damaged, or it may
cause short circuit and fire hazard.
3.
DO NOT charge non-rechargeable batteries. It might cause battery
leakage, battery explosion, personal injuries, etc.
4.
DO NOT put anything on the charger while charging batteries, it will
accumulate heat to cause fire hazard.
5.
5.Indoor use only, keep it away from direct sunlight and
moist/high-temperature environment.
6.
Children should not use this charger without any adult's supervision.
7.
Please Use only the detachable cord furnished with the charger for
connection to the alternate voltage. Type NISPT-2 or heavier
cord,minimum 18AWG copper.
8.
Place the batteries into the charger correctly by making sure the +/-
pole of battery matches the +/- pole of the charger.
9.
The absolute 0 volt battery can not be charged in this charger. If the
indicator does not light on when installing the battery, please check
if the battery is absolute 0 volt.
10.
EBL-C9042W is ONLY designed for Ni-MH, Ni-CD rechargeable
batteries. Please DO NOT put any other types of batteries in this
charger, especially alkaline batteries.
11.
New battery will reach the best performance after using 2-3 times.
12.
Battery power will lose because of long time storage. Please charge
the battery fully if it is not used for long time.
13.
It's normal that the battery becomes hot while charging. The
temperature will cool down to normal later, please feel free to use it.
14.
Cutting off the power supply when the charger finish its work.
WARNINGS
06
Publicidad
