Auto Off Timer; Weekly Timer - Mitsubishi Electric Mr.Slim PSA-M KA Serie Manual De Instrucciones

6. Timer

6.1.2 Auto off timer

<Button operation>
Timer
On/Off timer Yes
On AM 12:50 OFF PM 2:30
Repeat Yes
Auto-Off No
Stop in --- min
Setting display:
Cursor
F1 F2 F3 F4
Auto-Off timer
Auto-Off No /Yes
Stop in 120 min
Select:
Cursor Cursor
F1 F2 F3 F4
Auto-Off timer
Auto-Off No /Yes
Stop in 120 min
Select:
Cursor Time
F1 F2 F3 F4
Auto-Off timer
Auto-Off No /Yes
Stop in 120 min
Select:
Cursor Time
F1 F2 F3 F4
Auto-Off timer
Auto-Off No /Yes
Stop in 120 min
Changes saved
Main menu:
Bring up the Timer setting screen.
(Refer to page 10)
Select "Auto-Off", and press the
[SELECT] button.
The Auto-Off timer will not work
in the following cases:
when Auto-Off timer is disabled,
during an error, during check (in
the service menu), during test run,
during remote controller diagno-
sis, during function setting, when
the system is centrally controlled
(when On/Off operation or timer
operation from local controller is
prohibited).
The current settings will appear.
Move the cursor to "Auto-Off" or
"Stop in --- min" with the [F1] or
[F2] button.
Change the setting with the [F3] or
[F4] button.
• Auto-Off: No (disable)/Yes (enable)
• Stop in --- min:
Timer setting (The settable range
is 30 to 240 minutes in 10-minute
increments.)
Press the [SELECT] button to save
the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu
........ [MENU] button
• To return to the previous screen
........ [RETURN] button
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan

6.2. Weekly timer

<Button operation>
Timer menu
Timer
Weekily timer
OU silent mode
Night setback
Main menu:
Cursor
F1 F2 F3 F4
Weekly timer 1 1/2
Mon Tue Wed Thu Fri Sat Sun
No.1 - - - - : - - - - - - - - ° C
2 - - - - : - - - - - - - - ° C
3 - - - - : - - - - - - - - ° C
4 - - - - : - - - - - - - - ° C
Setting display:
day Page 2
F1 F2 F3 F4
Weekly timer
Action No /1 /2
Setting 1 /2
Select:
Cursor Cursor
F1 F2 F3 F4
will appear on the Main display
in the Full mode when the Auto-Off
timer is enabled.
appears when the timer is
disabled by the centralized control
system.
Select "Weekly timer" from the
Timer menu, and press the
[SELECT] button.
The Weekly timer will not work
in the following cases:
when the On/Off timer is enabled,
when the weekly timer is disabled,
during an error, during check (in
the service menu), during test run,
during remote controller diagno-
sis, when the clock is not set, dur-
ing function setting, when the sys-
tem is centrally controlled (On/Off
operation, temperature setting, or
timer operation from local remote
controller is prohibited).
The current settings will appear.
Press the [F1] or [F2] button to see
the settings for each day of the
week.
Press the [F3] button to see pat-
terns 5 through 8.
Press the [F4] button to display the
status of Setting 2.
Press the [SELECT] button to go to
the setting screen.
The weekly timer settings screen
will appear.
In the "Action" setting, select "1" to
enable the timer setting 1, or select
"2" to enable the timer setting 2 with
the [F3] or [F4] button. Then, press
the [SELECT] button.
To check the setting contents of the
timer setting 1 or 2, move the cur-
sor to "Setting" with the [F1] or [F2]
button, and select "1" or "2" with
the [F3] or [F4] button.
en
11