Battery Installation - ExecutiveSafe G0135E Manual De Usuario

Using the override key to open the safe
Remove the keypad by pressing the tab and turning the keypad counter clockwise as shown in
Fig.1. The keypad can hang by the connecting cable while unlocking the safe. Insert the key in the
key hole and turn it clockwise 1/4 turn (until it stops) to unlock the safe. Rotate the handle clock
wise and open the door.
Fig. 1
NOTE: DO NOT STORE THE OVERRIDE KEY IN YOUR SAFE!
Please secure your override keys in a safe place. If the override
keys are lost or damaged, contact your local ExecutiveSafe office.

Battery Installation

One alkaline PP3 9V battery (included) is required.
NOTE: Non-alkaline or rechargeable batteries ARE NOT RECOMMENDED
To install the battery, Remove the keypad by pressing the tab and turning the keypad counter
clockwise as shown in Fig.1. The keypad can hang by the connecting cable while the battery is
installed. Insert the battery as indicated.
NOTE: Battery should be replaced when both the red and green lights come on at the same
time when the combination is entered or when a key is pressed and the red light comes on.