Publicidad
Idiomas disponibles
Idiomas disponibles
Programming your Combination
For your safety, please program your combination before start using the safe.
The Safe is shipped with the preprogrammed combination 159#
Open the door, and then press once the red push button (remove the protective cap first) located at
the back of the door near the hinge side.
The yellow LED will go on followed by 2 short buzzer beeps.
Enter your new combination code (3-8 digits) followed by the "*" key.
The yellow LED will go off followed by two short buzzer beeps to indicate that the new
Combination code has been accepted and stored.
The previous programmed combination is deleted.
If the yellow LED flushes three times followed by three buzzer beeps then the programming of the
combination needs to be repeated.
Test the combination you just programmed with the door open.
Opening and Closing your Safe
Opening the Safe:
Enter your Combination followed by the "#" button.
The Green LED light will come on. While the Green light is on turn the handle clockwise
until it stops and open the door.
Closing the Safe:
Close the door and turn the handle counterclockwise until it stops.
Lock Out Function
If a wrong code is entered three times in a row, the safe will begin a 20 second secure lockout
period.
If the wrong combination is entered 3 more times after the first lockout period the safe will begin
the 5 minute secure lockout period.
During this secure lockout period the keypad will become disabled.
Once the secure lockout period has expired, the safe can be unlocked using the correct
combination. You may use the override key to open safe, but the keypad has to complete the
secure full lockout period.
Turning the keypad sound on and off
The keypad sound can be turned off by entering the code *633
The keypad sound can be turned on by entering the code *66
Publicidad
