Battery Insertion/ Exchange; Operating Elements; Handling And Operation; Switching The Appliance On/Off - Powerfix Profi PLPRS A1 Instrucciones De Uso

Battery insertion/ exchange

This wax melter requires 2 x 1.5 V batteries, type
AA/LR6/Mignon, for operation.
♦ Open the battery compartment
underside of the wax melter
♦ Place the batteries into the battery compart-
ment
depicted in it.
♦ Close and secure the battery compartment.

Operating elements

Handling and operation

In this chapter you will receive important infor-
mation for the handling and operation of the
appliance.
Switching the appliance on/off
♦ To switch the appliance on, place the On/
Off switch
♦ Press and hold the activation button
heat up the wax melter tip
♦ To switch the appliance off, place the On/
Off switch

Application example

Preparation (Fig. A)
♦ Clean the damaged area with the spatula
and remove all loose parts. Press the edges
of the damaged area round.
Colour selection (Fig. B)
♦ Select the matching colour tone.
Ensure that several colour tones, from light to
dark, are always used. With real wood, it is
recommended to additionally work with trans-
parent (K), so as to achieve a sense of depth.
PLPRS A1
, following the polarity details as
Wax melter
Wax melter tip
On/Off switch
Activation button
Battery compartment
Cleaning scraper
Scraper with planer function
Scraper with curvature
Sanding sponge
Cleaning cloth
at the position "ON".
at the position "OFF".
on the
.
to
.
GB
MT
43