SIMPLE KEY USER GUIDE
•
Five distinct beeps at 1-second intervals indicate that the maximum number of keys have been paired to your vehicle. Your
vehicle allows a maximum of 5 paired keys. If the vehicle already has 5 paired keys, a new key cannot be paired. Perform the
ERASE ALL BUT 1 EXISTING KEY process and then attempt the PAIR NEW KEY process again. Gray valet keys should be
paired before black master keys.
Q: The new key won't pair to my car.
A: If the EZ Installer doesn't pair the key to your car, most likely an incorrect dial position was used. In this case, the
EZ Installer will beep continuously after you press the pairing button. Check the compatibility section on pages 4-11 to
confirm the correct dial position for your make, model, year, and transponder chip of your original key. If an alternate dial
position(s) is listed for your vehicle, unplug the EZ Installer, turn the knob to the alternate position, and try pairing again.
If the key still won't pair, please contact customer service at 888-598-8910.
Q: The EZ Installer was unplugged during the pairing process.
A: The EZ Installer must remain plugged into the on-board diagnostic (OBD) port until pairing is complete. If the EZ
Installer becomes unplugged during the pairing process, turn the ignition to the OFF position, remove the key, and begin
the pairing process again.
Q: The vehicle won't start with the new key or old keys after attempting to pair.
A: Please call Car Keys Express customer service at 888-598-8910.
For help or assistance, please contact technical support at: 888-598-8910.
16
HELP
SIMPLE KEY USER GUIDE
OTHER KEYS
Visit CarKeysExpress.com to find a variety of award-winning products, like Universal Car Keys, Universal Car Remotes, and
OEM keys and remotes.
17