Use - Casselin CSAPAS Manual De Instrucciones

device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.

5.2 Use

WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
ASSEMBLY
COMMISSIONING
The device must be completely removed from its packaging. All guards must be fully
withdrawn. Place the device on a solid, flat surface Never place the device on a flammable surface.
Do not install this device near open fires or other heating devices.
The electrical cable must be protected to at least 16 Amps. The device must be plugged directly into a wall
outlet. Using a power strip will trip the device.
Heat the unit for 10 minutes until all the smoke and smell are dissipated.
Switch off and unplug the appliance, then use hot soapy water to clean the plates in
stainless steel. NEVER use cold water on the stainless steel plates because you risk causing a shock
thermal.
USE
Plug in the device, once plugged in the red light comes on.
Turn the temperature adjustment knob. The green light comes on The temperature can be included
between 60° and 300°C.
We recommend that you use this device at a maximum temperature of 250°C.
Place the screws to position the glass
correctly.
Then tighten all the screws.
Contains: 8 screws
Scr
ew
Scr
ew
FR