Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1.
Ensure your computer system and monitors are powered off.
2.
Connect the splitter to your video source.
3.
Connect the outputs of the splitter to the monitors with optional cables.
4.
Power on your monitors followed by your computer system.
Note
1.
The product is a Multi-Stream Transport (MST) hub and supports the
extended desktop configuration of DisplayPort. In Windows, the connected
monitors are controlled individually, and can be combined into one large
display.
2.
If the connected computer does not support MST, the ViewXpand™
technology is activated. Multiple monitors with the same resolution are
recognized as one single large display, allowing desktop display on multiple
external monitors, e.g. in Mac OS. The maximum resolution is
3840 x 1080 @ 60 Hz.
3.
Please use short length and high-quality cables, especially for higher
resolutions.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 10/2022
-3-
Publicidad
