Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
How to assemble the tube
Users can assemble their own tube by adding the foreseen nozzles:
1.
Cut the tube at the points where you want to apply a nozzle
2.
Insert the tube into the attachments of the quick connector
3.
Insert the nozzle on the connector
4.
To detach the tube from the quick connector, press the end ring of the connector and pull
the tube out.
Connecting the tube to the nebulizer
1.
Remove a nozzle from the nebulizer: press the ring of the connector on which it is inserted,
then pull out the nozzle.
2.
Connect the tube directly to the attachment previously used for the nozzle.
3.
Close the end attachment of the quick T-connector of the tube with one of the plastic caps
provided.
1
50
Art. 420
Geyser Nebulizer Mini 2 L Li-Ion
Assembly and use
1
3
2
Art. 420
Geyser Nebulizer Mini 2 L Li-Ion
Assembly and use
Operation
1.
Unscrew the nebulizer head to access the canister;
2.
Pour water and the treatment product to be used into the canister according to the dilution
instructions on the label;
3.
Close the canister by screwing the nebulizer head back on;
2
4.
Press the power button on the side of the machine to start treatment. The nebulisation
starts after 30 seconds to ensure the safety of the operator, who has time to move away
from the device. During this 30 seconds the nebuliser beeps repeatedly, signalling to move
away from the atomising area;
5.
The device will nebulise for 120 seconds and then turn off automatically;
4
6.
At any time, nebulisation can be interrupted by pressing the power button again.
(CAUTION: In this case, follow the instructions on the label of the product used and make
sure not to inhale the nebulised product and wash any parts of the body that come into
contact with the nebulised product immediately and thoroughly).
3
For further information about the product, please contact info@stockergarden.com.
51
Publicidad
