Charging The Player; Playback Options; Last Memory - KLIM Speaker Manual Del Usuario

CHARGING THE PLAYER

This product is equipped with one
charging cable. You can use any
charger that supports USB 2.0
protocol or standard USB charger to
charge the player.
NOTE: Once the battery becomes too
low, a flashing battery indicator will
appear on the display.
Charging time: It takes around 3-4 hours to fully charge the player (this
varies depending on the power output). When the battery is being
charged, the LED indicator is red. Once the player is fully charged, the
LED indicator will turn green.

PLAYBACK OPTIONS

Each time the MODE button is pressed, the order of the tracks played
will be as follows: Repeat current track (REP1), DIR (Folder read),
Repeat all (ALL), Shuffle (SHUF), preview play (INTRO (first 10 seconds
of a track).
SHUF
DIR ALL
INTRO
SAVING TRACK PRESETS
1. Press to stop all playback.
2. Press to enter programming mode.
3. Press and to select the track you want to save, then press PROG
to save it.
4. Repeat step 3 until you have assigned all the tracks. You can assign up
to 30 tracks.
5. Press while in programming mode to start playing your track
selection.
To exit programming mode, press the
NOTE: the preselection is not stored in memory. Once you leave the
programming mode, you'll need to reprogram all tracks again.

LAST MEMORY

ON: The player will return to the last played track on the CD.
OFF: The player will not return to the last track played on the CD.
5
ENGLISH
button.