Descargar Imprimir esta página

Blaupunkt BLUEBOT COMFORT PLUS Manual De Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 110
SAFETY REGULATIONS
NOTE
:
· Only authorized technicians can disassemble this product. Users are not
recommended to disassemble this product by themselves.
· This product can only use the power adapter provided by the factory. lf other
adapters are used, the product may be damaged.
· Do not touch wires, sockets or power adapters when your hands are wet.
· Do not use cloth curtains or body parts to roll into the product drive wheels.
· Do not place this product near cigarette butts, lighters and other smoldering res.
· Please clean the product after charging.
· Do not bend wires excessively or place heavy objects and sharp objects on the
machine.
· This product is an indoor household product. Do not use it outdoors.
· Do not sit on the product.
· Do not use this product (e.g. bathroom) in a wet environment.
· Before using this product, please remove all vulnerable items (e.g. glasses, lamps,
etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may
entangle the side brushes and air suction passages.
· Do not put this product in a place where it is easy to fall (e.g. on desks and chairs by
the stair case).
4
· Please carefully check whether the power adapter is connected to the socket before
use, otherwise the battery may be damaged.
· To prevent tripping, please inform other members of the house when this product works.
· Please empty the dust bin before using this product when the dust bin is full.
· The temperature used for this product is 0 to 40 degrees Celsius.
· Do not use this product in high temperature environments.
· Please remove the battery from the machine before the product is scrapped.
· Please make sure that this product is not powered on when removing the battery.
· Please recycle the discarded batteries safely.
· Recommended to block the staircase exit or areas where the robot may fall. The anti-
drop sensors prevent the robot from tumbling down stars and steep drops. However,
they may work less e ectively when dirty or used on re ective/very dark-colored oors.
· To clean and maintain the robot and the auto station, you must turn o both. Pull out
the power cord from the socket and disconnect the power supply rst.
· Do not immerse the robot or the auto station in water for cleaning or rinse them with water.
· Do not whipe any part of the product with a damp cloth or any liquid.
· Do not use the mopping module on the carpet.

Publicidad

loading